SIT9003.AC-33-33ED-24.000000

Device Type Spread Spectrum Oscillators
频率
24 MHz
频率Stability (ppm)
50.
Operating Temp. Range (°C)
-20 to 70
Output Type
LVCMOS
Supply Voltage (V)
3.30
封装尺寸(mm x mm)
5.0x3.2
Package Height (mm)
0.75
输出驱动强度*
默认
特征PIN.
输出使能
拉力范围(PPM PR)
n/a
Spread Percentage
±0.50%
Swing Select
n/a
直流耦合输出Vol或AC Swing
n/a
DC-Coupled Output VOH
n/a
RoHS
Yes
评论
不推荐用于新设计

*See datasheet for details

Tape & Reel Options

T = 3,000 ct
X = 1,500 ct
Y = 250 ct

Flexible spread options supporting up to 12 dB EMI reduction

  • 中心传播百分比:±0.25%和±0.5%
  • 下降百分比:-0.5%和-1.0%:最多12dB的EMI减少

Best cycle-to-cycle jitter of < 30 ps

  • Minimizes impact to system timing budget;

Lowest power consumption of any programmable oscillator

  • 3.5 mA typical power consumption
  • 1.2 µA typical standby current:
  • 延长电池寿命
  • 为系统设计人员储备更多的电源预算

3毫秒典型的恢复时间

  • Enables system to go in and out of standby mode quickly, conserving battery power

广泛的可编程性

  • Any frequency between 1 to 110 MHz with 5 decimal place accuracy
  • 电源电压为1.8 V,2.5 V,2.8 V和3.3 V.
  • 频率稳定性为±50 ppm至±100 ppm
  • 可调上升/下降时间:
  • 提供设计人员有机会为许多设计使用相同的基础产品
  • Customize specification for optimal system performance
  • Configurable slew rate, enabling additional EMI control
  • Re-use of the same base product for many designs

四个行业标准包

  • 100% drop-in replacement of crystal oscillators

  • 使得无需董事会的EMI减少重新设计,金属外壳或其他昂贵的EMI减少方法

Ultra-fast lead time (4 to 6 weeks)

  • Reduce inventory overhead
  • Mitigate shortage risks

  • 监控摄像头
  • IP cameras
  • Automotive ADAS cameras
  • 工业电机
  • Flat panels
  • Multi-function printers
  • PCIE.

Narrow By:

eval委员会(Contact SiTime)坐6081 (2520) | SiT6082 (3225) | SiT6083 (5032) | SiT6084 (7050)

时间机器II程序员Program frequency, voltage, stability & more

频率斜率(DF / DT)计算器– Calculate frequency slope over temperature

Reliability Calculator- 获取各种操作条件的适合/ MTBF数据

2520 4-Pins|3225 4-Pins|50.32 4-Pins|7050 4针|7050 4针with CP– Preview packages withQFN3D步骤模型

Narrow By:

Resource Name Type
SIT9003(LVCMOS,1.8 V) Ibis模型
SIT9003(LVCMOS,2.8 V) Ibis模型
Silicon MEMS Reliability and Resilience Presentations
性能比较:硅MEMS经验石英振荡器 Presentations
如何测量精密定时应用中的时钟抖动 Presentations
How to Measure Phase Jitter and Phase Noise in Precision Timing Applications Presentations
如何使用Sentime的新现场编程器获得即时振荡器 Presentations
Silicon MEMS vs Quartz Supply Chain Presentations
MEMS Timing Solutions Improve Touchscreen Devices 白皮书
用于医疗应用的现场可编程定时解决方案 白皮书
MEMS oscillators improve reliability and system performance in motor control applications 白皮书
基于MEMS的谐振器和振荡器现在更换了石英 Presentations
Getting In Touch with MEMS: The Electromechanical Interface Presentations
现场可编程振荡器数据表 Datasheets
SIT9003.Datasheet Datasheets
Time Machine II MEMS Oscillator Programmer Product Briefs
J-AN10002 シングルエンド発振器の推奨終端方法 Application Notes
AN10002用于单端振荡器的终止建议,驱动单个或多个负载 Application Notes
J-AN10005 SiTimeスペクトラム拡散クロック発振器 Application Notes
J-AN10006仪器のPCBデザインのガイドライン Application Notes
AN10006 Best Design and Layout Practices Application Notes
AN10007 Clock Jitter Definitions and Measurement Methods Application Notes
J-AN10007 クロックジッタの定義と測定方法 Application Notes
J-AN10022 SiTime発振器SiT8103、SiT8003、SiT9003の 立ち上がり/立ち下がり時間調整 Application Notes
AN10022 Rise and Fall Time Selection for SiT8103, SiT8003, and SiT9003 Application Notes
距离浮气器函数计算方法 Technology Papers
AN10025 Reliability Calculations for SiTime Oscillators Application Notes
J-AN10028 プローブを使用した発振器の出力波形計測方法 Application Notes
AN10028探测振荡器输出 Application Notes
MEMSおよび水晶ベース発振器の電磁場感受率の比較 Technology Papers
Electromagnetic Susceptibility Comparison of MEMS and Quartz-based Oscillators Technology Papers
MEMS発振器と水晶発振器の性能比較(耐衝撃と耐振動) Technology Papers
Shock and Vibration Comparison of MEMS and Quartz-based Oscillators Technology Papers
J-AN10033 発振器の周波数測定ガイドライン Application Notes
AN10033 Frequency Measurement Guidelines for Oscillators Application Notes
シリコンMEMS発振器の耐性および信頼性 Technology Papers
Resilience and Reliability of Silicon MEMS Oscillators Technology Papers
sitの MEMS First™ プロセス技術 Technology Papers
sit's MEMS First™ and EpiSeal™ Processes Technology Papers
使用振荡器而不是晶体谐振器的前8个理由 白皮书
EMI Reduction Oscillators for Industrial, Automotive and Consumer Applications Product Briefs
MEMS谐振器优势 - MEMS谐振器如何工作第2部分betway开户官网 Presentations
How to Measure Long-term Jitter and Cycle-to-cycle Jitter in Precision Timing Applications Presentations
硅MEMS振荡器频率特性和测量技术 Presentations
AN10005扩频时钟振荡器 Application Notes
SC-AN10007 时钟抖动定义与测量方法 Application Notes
SC-AN10033 振荡器频率测量指南 Application Notes
Phase Noise Measurement Tutorial Videos
PCI Express Refclk Jitter Compliance using a Phase Noise Analyzer Presentations
Advantages of MEMS Timing - Parameters Videos
sitMEMS Oscillators - Revolutionizing the Timing Market Videos
Sentime的时间机器II - 第1部分:如何安装振荡器编程软件 Videos
sit's Time Machine II - Part 2: How to Program Field Programmable Oscillators Videos
QFN 2520 4-Pins 3D Step Models
qfn 3225 4-pins 3D Step Models
QFN 5032 4-Pins 3D Step Models
QFN 7050 4-Pins 3D Step Models
QFN 7050 4-Pins with CP 3D Step Models
sitMEMS First 工艺 Technology Papers
AN10073如何设置实时示波器以测量抖动 Application Notes
AN10071 Computing TIE Crest Factors for Telecom Applications Application Notes
AN10070计算领带的非电信应用领带因素 Application Notes
AN10072 Determine the Dominant Source of Phase Noise, by Inspection Application Notes
AN10074 Removing Oscilloscope Noise from RMS Jitter Measurements Application Notes